The MABRI.VISION testing system INLINE.SECTOR F1 describes the future of quality control of plastic and silicone hoses: non-destructive and in production cycle.
A 360° sensor creates cross-sections to check the inside and outside diameter, wall thickness and geometry of semi-transparent tubes: directly in your extrusion line.
Testing processes must be perfectly integrated into production processes. MABRI.VISION therefore relies on innovative solutions to support your testing process.
The MABRI.VISION testing system INLINE.SECTOR F1 carries out hose testing non-destructively and continuously. This means you can consistently achieve reliable tolerances and reduce your material consumption.
Through continuous testing, the INLINE.SECTOR F1 enables you to set up the production system more quickly. This will help you avoid initial errors and save production time.
The INLINE.SECTOR F1 tests tubes for applications with the highest demands directly in your extrusion line. The non-contact measuring method enables, among other things, the testing of wall thicknesses, shape and offset.
The inline testing system from MABRI.VISION enables wall thickness to be recorded from up to 16 directions at the same time. The testing takes place simultaneously with your production and is completely non-destructive.
Precise testing of core offset on semi-transparent tubes (both colorless and colored) with a diameter of 0.5 mm - 20 mm and a wall thickness of 0.1 mm - 4 mm.
Measurement of inner and outer diameter, minimum and maximum wall thickness, ovality and core offset. Get complete imaging of the cross section of your single lumen tubes.
Generated measured values are saved and can be analyzed and exported. The database functionality can be expanded according to your requirements, for example to include time history graphs for any process parameters.
Benefit from a clear interface for visualizing and analyzing the tests. Interfaces to your systems can be expanded as desired (e.g. Profinet, Profibus, digital I/O and analog).
The powerful MABRI.VISION software represents an individual solution for the inline reconstruction of the hose geometry from sensor data. Our software experts rely on innovative algorithms for reconstruction as well as processing performance optimized for inline testing.
A variety of analysis tools are available to the user for an intuitive and uncomplicated evaluation. This allows you to carry out a comprehensive hose test and identify and implement optimization potential in your production.
100% quality control is of fundamental importance in medical technology. The INLINE.SECTOR F1 testing system enables complete testing of transparent and semi-transparent tubes in the medical industry.
When testing infusion tubes for defects and geometric properties, the focus is on precision and reliability - properties that MABRI.VISION unconditionally fulfills with the INLINE.SECTOR F1.
The MABRI.VISION testing system INLINE.SECTOR F1 offers 100% inline testing for tubes used in dialysis and blood donation. Trust in MABRI.VISION’s experience in this area.