Menu
Inline hose wall thickness testing system INLINE.SECTOR F1
Inline hose wall thickness
inspection system INLINE.SECTOR F1
The future of tube inspection.
The MABRI.VISION INLINE.SECTOR F1 inspection system describes the future of quality control of plastic and silicone tubes: non-destructive and in the production cycle.
Efficient and on the move.
A 360 ° sensor creates cross-sections to inspect the inside and outside diameter, wall thickness and geometry of semi-transparent tubes: directly in your extrusion line.
Innovation - our passion!
Inspection processes must be perfectly integrated into production processes. MABRI.VISION therefore relies on innovative solutions to support your inspection process.
Your advantage.
Save material.
The MABRI.VISION inspection system INLINE.SECTOR F1 carries out the tube inspection continuously and non-destructively. In this way, you can maintain reliable tolerances throughout and reduce your material consumption.
Start up production faster.
Continuous inspecting enables the INLINE.SECTOR F1 to accelerate the setting of the production system. In this way you avoid initial error reports and gain production time.
100% quality certificate.
Achieve a holistic inspection of your products. The 100% inspection with a certified inspection system can help accelerate the certification of your production products.
Check inline.
The INLINE.SECTOR F1 checks tubes for applications with the highest demands directly in your extrusion line. The non-contact measuring method enables, among other things, the inspection of wall thickness, shape and misalignment.
Wall thickness.
The inline inspection system from MABRI.VISION enables the wall thickness to be measured from up to 16 directions at the same time. The inspection is carried out simultaneously with your production and is absolutely non-destructive.
Core offset.
Precise inspecting of the core offset on semitransparent tubes (both colorless and colored) with a diameter of 0.5 mm - 20 mm and a wall thickness of 0.1 mm - 4 mm.
Inside and outside diameter.
Measurement of inside and outside diameter, minimum and maximum wall thickness, ovality and core offset. Get a complete cross-section imaging of your single lumen tubes.
History & statistics.
Generated measured values are saved and can be analyzed and exported. The database functionality can be expanded according to your requirements, for example with time history graphs for any process parameters.
clear.
Benefit from a clear interface for visualizing and analyzing the inspections. Interfaces to your systems can be expanded as required (e.g. Profinet, Profibus, digital I / O and analog).
Powerful and intuitive software.
The powerful MABRI.VISION software represents an individual solution for the inline reconstruction of the tube geometry from sensor data. Our software experts rely on innovative algorithms for the reconstruction and on processing performance optimized for inline testing.
A large number of analysis tools are available to the user for an intuitive and uncomplicated evaluation. In this way, you can carry out a comprehensive tube inspection and identify and implement optimization potential in your production.
Powerful and intuitive software.
The powerful MABRI.VISION software represents an individual solution for the inline reconstruction of the tube geometry from sensor data. Our software experts rely on innovative algorithms for the reconstruction and on processing performance optimized for inline testing.
A large number of analysis tools are available to the user for an intuitive and uncomplicated evaluation. In this way, you can carry out a comprehensive tube inspection and identify and implement optimization potential in your production.
Universally applicable
MEDICAL TECHNOLOGY
A 100% quality control is of fundamental importance in medical technology. The INLINE.SECTOR F1 inspection system enables complete inspecting of transparent and semi-transparent tubes in the medical industry.
INFUSION
When inspecting infusion tubes for defects and geometric properties, the focus is on precision and reliability - properties that MABRI.VISION unconditionally fulfills with the INLINE.SECTOR F1.
DIALYSIS & BLOOD DONATION
The MABRI.VISION INLINE.SECTOR F1 inspection system offers a 100% inline inspection for tubes that are used in dialysis and blood donation. Trust in the experience of MABRI.VISION in this area.
Specifications.
Audits
| Tube diameter | 0.5 - 20 mm |
| Wall thicknesses | 0.1 - 4 mm |
| Measurement frequency | up to 150 Hz |
| Repeatability | 0.1 µm |
| Belt speed | 500 m / min |
| materials | Silicone, PVC, PMMA |
| Inspections | Wall thickness, shape, core offset |
INTERFACES AND SOFTWARE
| Software Interfaces | ProfiNet, EtherNet |
| Display | 24 inch monitor, touch |
| Functions and modules | Recipes, database, user management |
| Operating system | Windows 10 |
| Software | MV.IMAGING |
System
| Dimensions sensor (W x D x H) | (550 x 280 x 140) mm³ |
| Weight sensor | 18 kg |
| Dimensions controller (W x D x H) | 19 ", 6U |
| resolution | 0.1 µm |
| Weight controller | 11.8 kg |
| Operating temperature | 10 ° to 40 ° |
| Rated capacity | 2.3 kW |
| Supply | 100-240V |
